Window and Door Frame Sealant


Features and benefits






EVO-STIK Window and Door Frame Sealant is a flexible, easy-to-apply white acrylic sealant designed to create a long-lasting finish when sealing around external and internal window and door frames.
Whether you’re fitting new frames or refreshing existing ones, this weatherproof window and door sealant provides a reliable barrier against draughts, rainwater, and dust.
Super simple to apply and providing a reliable, smooth seal it's our best window and door silicone for DIYers. Once applied, it forms a durable seal that accommodates small movements around frames without cracking or shrinking over time - perfect for dealing with the natural expansion and contraction of frames due to temperature changes.
Suitable for sealing gaps and joints between window frames, door frames, and adjacent surfaces like brick, masonry, concrete, wood, and uPVC, EVO-STIK Window and Door Frame Sealant bonds well to most common building materials. It is paintable once cured, allowing you to match the seal to your frame or wall colour for a seamless finish.
Suitable materials: Aluminium, metal, mortar, brickwork, wood, uPVC door and window frames.
Sizes: 280ml cartridge.
Coverage: Approx. 11m of a 5mm bead per cartridge.
Colour: White
HOW TO USE
PREPARATION
1. Joint surfaces must be sound, clean and free from contaminants such as dust, oil, grease and any loose material.
2. If desired, place masking tape along the joint edges before application.
APPLICATION
3. Unscrew the nozzle, and using a sharp knife, carefully cut off the dome of the window and door frame sealant, taking care not to damage the thread. Screw the nozzle on to the cartridge.
4. Cut off the tapered end of the nozzle at a 45° angle, to a width matching the gap to be sealed.
5. Fit the cartridge into the cartridge gun by pressing the release plate and pulling out the plunger. Insert cartridge and repeatedly squeeze the trigger until the sealant appears.
6. Place the nozzle at the start of the gap and gently squeeze the trigger. Push forward slowly, ensuring that contact is made by the sealant with both sides of the gap. At the end of the run, release the trigger and press the plunger release plate of the gun.
7. Smooth the sealant with a wet, round ended tool (do not use a wetted finger), remove any excess with a cloth moistened with white spirit and then remove the masking tape (if used) from either side of the bead.
8. After use, ensure to wipe away any excess sealant from the nozzle. Replace the cap.

HOW TO REMOVE
- Uncured sealant: Excess uncured sealant should be removed carefully using a soft scraper. The remainder can be removed using a cloth moistened with white spirit. Repeat using another clean cloth moistened with white spirit.
- Cured sealant: There is no adequate solvent; carefully cut away excess with a very sharp knife. Do not use solvent to remove product from skin – use soap and water.
FAQs
EVO-STIK Window and Door Frame Sealant should form a skin within 1-2 hours, and may take up to one week to dry all the way through.
Yes, although you need to wait until it is fully dry before starting to paint it.
Yes - it forms a durable, flexible seal that will prevent both leaks and draughts.
EVO-STIK Window and Door Frame Sealant will not be waterproof until it is fully dry, and can therefore be damaged by rainfall.