Liquid Nails Interior
Features and benefits
EVO-STIK Liquid Nails Interior is a solvent-free grab adhesive offering high strength and gap-filling properties. It's low odour, solvent-free formula makes it suitable for internal DIY projects, eliminating the need for nails and screws.
This quick-dry liquid nails adhesive is designed to bond most porous and non-porous building materials*. Whether you're working on wood, plywood, ceramics, concrete, plasterboard, metal, or even foam polystyrene, this interior grab adhesive will create a reliable bond with no measuring, drilling, or hammering required – just quick, clean, and efficient bonding every time.
EVO-STIK interior liquid nails glue is supplied in an easy-to-use cartridge with an easy to cut nozzle to enable precise application. Seamlessly affix decorative wall panels, timber battens, skirtings, dado rails, carpet gripper strips and stair nosing's in place.
If excess adhesive is applied, simply wipe it away using a clean, damp cloth. The dried adhesive can then be sanded and painted with most paints.
Suitable materials: Most building materials including wood, hardboard, plywood, ceramics, concrete, plasterboard, metal, GRP, foam polystyrene and more.
Sizes: 290ml cartridge.
Coverage: 11 metres with 6mm diameter bead per 290ml cartridge.
*Please note: When using EVO-STIK Liquid Nails Interior, one of the surfaces to be bonded must be porous.
HOW TO USE
1. Cut off the dome at the top of the cartridge taking care not to damage the thread. Cut the nozzle to the desired width and angle and screw onto the cartridge.
2. Insert the cartridge into a cartridge gun and repeatedly squeeze the trigger until the adhesive appears. Best results are achieved by applying beads of EVO-STIK Liquid Nails Interior onto one surface only.
3. For most surfaces, apply a 6mm diameter “zigzag” bead along the length of the item to be bonded. On large panels, apply bead around the edge and across the panel at approximately 400mm intervals.
4. Then using a twisting action, press the other surface into position to maximize surface contact and grab. Press surfaces together firmly for 30 seconds.
5. Some support may be necessary for up to 24 hours. Cold, damp conditions or thick layers of adhesive will greatly extend drying times.
HOW TO REMOVE
1. Uncured adhesive may be removed using cloths lightly moistened with white spirit, after carefully scraping off the bulk.
2. Cured adhesive can only be mechanically removed
FAQS
Yes - both EVO-STIK Liquid Nails Interior & EVO-STIK Liquid Nails Exterior can be used to fill gaps in uneven walls or similar surfaces. The adhesive can then be sanded and painted using most paints.
Yes - EVO-STIK Liquid Nails Exterior is suitable for outdoor use, as well as indoor use.
No - EVO-STIK Liquid Nails Interior adhesive can only be used indoors.
EVO-STIK Liquid Nails Exterior is a solvented grab adhesive that can be used in both indoor and outdoor environments.
EVO-STIK Liquid Nails Interior is a solvent-free grab adhesive that can only be used indoors.
EVO-STIK Liquid Nails Exterior (solvented adhesive) can be stored for up to 12 months from the date of manufacture when stored in the original, unopened packaging. For more details, see the technical data sheet.
EVO-STIK Liquid Nails Interior (solvent-free adhesive) can be stored for up to 24 months from the date of manufacture when stored in the original, unopened packaging. For more details, see the technical data sheet.
