Strong Stuff Waterproof Adhesive

Available colours
White
Colour indications are a guide only
Buy now
BUY NOW
Features and benefits

Features and benefits

EVO-STIK Strong Stuff Waterproof Adhesive is perfect for bonding to wet surfaces inside or outside the home
High-performance waterproof grab adhesive that even works under water!
Provides an instant, waterproof bond to most building materials
Suitable for use on wood, MDF, laminate, metal, PVC, cork, rubber, glass, stone, ceramics and more
Bonds panels, signs, wallboards, insulation boards and skirtings
Solvent-free
Easy-to-use
Suitable for interior & exterior
Waterproof
High strength
Interior
Exterior

EVO-STIK Strong Stuff Waterproof Adhesive is our best waterproof grab adhesive for bonding wet surfaces, even underwater! It’s perfect for DIY jobs inside or outside of the home, in all weather conditions. 

Our waterproof grab adhesive has a very low odour and is super easy-to-use. Strong Stuff Waterproof Adhesive will bond to most building materials including wood, concrete, brick, plaster, glass, ceramics, metals, rigid PVC, foam polystyrene and will even bond two impervious surfaces together. 

Suitable materials: Wood, MDF, plaster, brick, tiles, ceramics, plastics, PVC, concrete, stone, metal, glass, mirrors and more.

Sizes: 290ml.

Coverage: Approx. 14m of a 5mm bead per cartridge.


HOW TO USE

PREPARATION 

1. Surfaces must be sound, clean and free from contaminants such as dust, oil, grease and any loose material. 

2. Cut off the dome at the top of the cartridge taking care not to damage the thread. Cut the nozzle to the desired width and angle and screw onto the cartridge. 

3. Insert the adhesive cartridge into a cartridge gun and repeatedly squeeze the trigger until the adhesive appears. 

APPLICATION 

4. Apply parallel beads of the waterproof grab adhesive to one of the surfaces. 

5. Algin and bring the surfaces together ensuring to crush the beads of adhesive. 

HOW TO REMOVE WATERPRROOF ADHESIVE?

  • Uncured product may be removed using cloths lightly dampened with white spirit, after carefully scraping off the bulk. 
  • Cured product can only be removed by mechanical means. 

FAQs

A skin will form after 5 to 15 minutes. The adhesive will be fully cured after 17 to 24 hours depending on the ambient conditions.

After carefully scraping off the bulk, uncured adhesive may be removed using a cloth lightly moistened with white spirit. If it has cured then it will require mechanical removal, i.e. cutting, sanding or scraping.

No, we do not recommend EVO-STIK Strong Stuff Waterproof Adhesive for this use.