Adhesive Cleaner
Features and benefits
EVO-STIK Adhesive Cleaner is a versatile and powerful solution for removing solvent-based adhesives, offering fast and effective cleaning in a variety of applications.
Whether you're tackling freshly applied adhesive or removing dried, stubborn residue, this contact adhesive cleaner makes the job effortless. Its fast-acting formula saves time and effort, making it ideal for professionals and DIY enthusiasts alike when removing unwanted adhesive.
Not only will it remove adhesive, but this cleaner is ideal for prepping non-porous surfaces such as rubber, metals, plastics, and other impervious materials, ensuring they're ready for a strong, reliable bond. Plus, it’s perfect for tool maintenance to stop brushes, spatulas, and other equipment from getting coated in adhesive, helping keep them clean and extend their lifespan.
This impact adhesive remover can also be diluted with EVO-STIK 528 Contact Adhesive and EVO-STIK Impact Adhesive for priming very porous substrates. To prime, dilute 50:50 adhesive and cleaner.
Suitable materials: Rubber, metals and many other impervious surfaces.
Sizes: 250ml or 5 litres.
Colour: Clear.
HOW TO USE
PREPARATION
Always test the effects of the cleaner on an unseen area to determine its suitability; it may damage some sensitive surfaces.
Ensure good ventilation in the area. Push down and unscrew to remove the cap, puncture silver seal using a sharp object such as a screwdriver. Ensure container is properly sealed after use.
APPLICATION
1. Wearing gloves, use cloths made into pads and moisten them with the cleaner. Use the pad to wipe over the adhesive to be removed. In the case of rubbers, particularly black rubbers, some of the black may appear on the cloth; this is normal.
2. Always repeat the process with another clean pad moistened with cleaner. For removing larger areas of adhesive, it is best to use a new cloth at frequent intervals.
3. The use of a few washings with small quantities of cleaner is far more efficient than a single large washing.
4. Leave cloths outside until fully dry before disposal.
REMOVING DRIED ADHESIVE
For dried adhesive, it's important to try to minimise the amount of cleaner used. Therefore, attempt to remove the bulk of the material to be cleaned by mechanical means as this will drastically reduce the amount of cleaner required.
FAQS
No, EVO-STIK Adhesive Cleaner is not suitable for use on vinyl, polystyrene, cellulose paint or rayon fabrics. Always test the effects of the cleaner on an unseen or test area to determine its suitability before use.
Yes, the cleaner is solvented and has a sweet smelling odour. Ensure you’re in a well-ventilated area before applying and avoid breathing in the vapours.
1. Only prepare enough for immediate use.
2. Dilute EVO-STIK 528 Instant Contact Adhesive or EVO-STIK Impact Adhesive (see separate product data sheets) with an, approximately, equal volume of EVO-STIK Adhesive Cleaner in a clean container.
3. Dispose of any leftover mixture.
4. Always add cleaner to adhesive slowly, with gentle stirring.
5. Stir well.
