General purpose PVA
Features and benefits
EVO-STIK General Purpose PVA is a reliable, multi-functional adhesive, primer, sealer and dustproofer for a wide range of building and DIY applications. Perfect for interior use on most building surfaces, whether you're bonding materials, sealing surfaces, or priming walls for plaster, this EVO-STIK PVA delivers dependable performance and ease of use.
When used as a primer, EVO-STIK General Purpose PVA improves adhesion to porous or difficult surfaces prior to plastering or screeding. It's also ideal for sealing surfaces, enhancing finish quality and durability.
Supplied in a range of sizes, this multipurpose PVA glue can easily be brushed or rolled on, offering flexibility for different project needs.
Suitable materials: Bonds a wide range of materials provided one of the surfaces is porous, including timber, plywood, blockboard, chipboard, fibreboard, expanded polystyrene, polyurethane foam, insulating board, brick, concrete, plaster, stone and slate.
Sizes: 500ml, 1 litre, 2.5 litres or 5 litres.
Coverage: 6-10m² per litre depending on application thickness and substrate.
HOW TO USE
PREPARATION
1. Surfaces must be sound, clean and free from contaminants such as dust, oil, grease and any loose material.
2. Shake the general purpose PVA well before use.
3. The adhesive can be applied by brush, roller, spreader, or from a squeezable plastic bottle.
4. Bonding work must be done when the adhesive is still wet or tacky, but when using as a primer the adhesive must be allowed to dry
APPLICATION
To bond most types of wood under dry conditions:
5. Apply undiluted EVO-STIK General Purpose PVA to one surface. Join surfaces immediately and apply weight, or clamp joint for at least 1 hour.
Good to know: Discover how to use EVO-STIK General Purpose PVA as a primer in plastering applications, as a bonding agent, or as a dust sealer by referring to the Technical Data Sheet.
HOW TO REMOVE
- To remove wet PVA: Clean tools and equipment with warm, soapy water immediately after use.
- To remove dried PVA: Start by softening it with warm, soapy water or a vinegar solution. Gently scrape off the softened glue with a plastic scraper or cloth. For stubborn residue, rubbing alcohol or acetone can help break it down. Always test on a small area first to avoid damage.
FAQs
PVA stands for Polyvinyl Acetate.
EVO-STIK General Purpose PVA is white before use, but it dries to a transparent film.
No - it would initially work, but PVA has low wear resistance. It will also turn hazy white every time it gets wet.
No - it may leave areas with a sealed and shiny finish. Paint may then not be absorbed into those areas and could peel off. Instead, use a primer that’s recommended by the paint manufacturer.
