Mould Resistant Wall Tile Adhesive & Grout

EVO-STIK Mould Resistant Wall Tile Adhesive & Grout is an easy-to-use, ready-mixed wall tile adhesive and grout for all sizes of ceramic tiles, fixing the tiles in place as well as sealing them.

Colours

White

Sizes
1 litre
2.5 litres
5 litres

Product overview

EVO-STIK Mould Resistant Wall Tile Adhesive & Grout is an easy-to-use, ready-mixed wall tile adhesive and grout, perfect for all sizes of ceramic tiles.

The combined formula of this all-in-one tile adhesive and grout is designed to fix and finish wall tiles in one simple step, reducing installation time while delivering a neat, consistent result.

Suitable for high-moisture environments, it offers mould resistant protection and waterproof performance once set, making it ideal for showers, bathrooms and kitchen walls.

Plus, the high strength formula of EVO-STIK's mould proof grout and adhesive, means it sets in 24 hours, perfect for those who require a quick turnaround.

Suitable materials: Suitable for fixing onto most internal surfaces including plaster, plasterboard, glazed tiles, brick, cement renders and tile backer boards.

Suitable tiles: Ceramic wall tiles.

Sizes: Available as a 1L, 2.5L, 5L waterproof, mould resistant tile grout and adhesive, supplied in a PCR bucket.

Coverage: 0.8m² - 4.1m² dependent on unit size and substrate.   

Features & benefits

EVO-STIK's best mould resistant grout and adhesive for ceramic tiles

Ready-mixed wall tile adhesive and grout

Superior mould resistance

Waterproof when set

Ideal for bathroom, shower and kitchen areas, subject to frequent and prolonged wetting

Suitable for fixing ceramic tiles to plaster, plasterboard, glazed tiles, brick, cement render and tile back boards

Suitable for interior use

Supplied in a post-consumer recycled (PCR) tub

Downloads & resources

Mould Resistant Wall tile adesive & grout - Technical Data Sheet (263.98 KB)

This file is stored on an external website, please follow the link

How to use

Preparation

1. Make sure surfaces are clean, dry, solid, flat, and free from dust, grease, paint, or loose materials. Fill any cracks or holes.

2. Check your substrate to ensure the plaster or plasterboard can support the tile weight.  

3. Prime or prepare difficult surfaces:  

  • Lightly abrade very smooth surfaces.  
  • Prime dusty or very porous areas with a Bostik primer.

Application

4. Stir the product thoroughly before use. Spread adhesive onto the wall (around 3mm thick), working in small sections (about 1m² at a time) and comb through with a notched trowel.

5. Press tiles firmly into place with a slight twisting action. Check coverage occasionally by lifting a tile - the back should be fully covered.

6. Place a spacer at each corner (or side for staggered patterns) where tiles meet, ensuring they are positioned securely to prevent the tiles from shifting.

7. For wet areas (like showers), ensure a solid bed of adhesive is applied to avoid gaps behind tiles.

8. Remove spacers after 1–2 hours, once the adhesive has started to set.

Grouting

9. Allow at least 24 hours before grouting (up to 72 hours for less porous surfaces).

10. Apply grout firmly into joints using a spreader, working in small areas (around 0.5m²). Remove excess grout from tile surfaces straight away.  

11. Smooth joints with a damp sponge and clean tiles as you go to avoid residue.

12. Once dry, polish tiles with a clean, dry cloth. Leave tiled areas exposed to water (e.g. showers) for 7 days before use.   

How to remove

1. Wipe away any extra adhesive from tiles or surfaces while it is still wet.  

2. Clean tools immediately with warm, soapy water.  

Dried product? Removal will require mechanical cleaning, so it’s best to wipe away any excess straight away. 

Find new, smarter ways of doing things

Find out what product you need, how to use it and where to buy it.

PRODUCT FINDER