Rapid Set Floor Tile Grout

EVO-STIK Rapid Set Floor Tile Grout is a high quality, flexible cement based tile grout, suitable for interior and exterior use. The waterproof and frost resistant formulation can be used on grout joints up to 12mm wide, and can be applied onto most domestic underfloor heating systems and in sites with continuous immersion, such as swimming pools and power showers. 

Colours

Grey

Sizes
5kg

Product overview

EVO-STIK Rapid Set Floor Tile Grout is a go-to choice for a white floor tile grout that tough, flexible and ready for action in no time. It's specially formulated for DIYers and professionals alike, providing a fast set floor tile grout that makes grouting floors quicker, easier, and longer-lasting - without compromising on finish.

The flexible, cement-based formulation absorbs movement and minimises cracking, making it ideal for both concrete and wooden subfloors. Whether it’s your kitchen, bathroom, hallway, or even patio, this grout performs brilliantly in a wide range of environments with its waterproof and frost-resistant properties. Plus, EVO-STIK Rapid Set Floor Tile Grout works seamlessly with most domestic underfloor heating systems.

Suitable for all types of floor tiles including ceramic, porcelain, natural stone and more, with grout lines up to 12mm wide.

Suitable materials: For grouting tiles onto concrete and wooden floors.

Suitable tiles: All types of floor tiles.

Sizes: 5kg bag.

Coverage: 6.5m² per 5kg - dependent upon the nature of the substrate, the type of tile, tile dimensions and the width of the grout joints. 

Features & benefits

  • A rapid set floor tile grout for most types of tiles 

  • Sets in just 3 hours

  • For grout joints up to 12mm wide

  • Suitable for all types of tiles

  • Can be used with underfloor heating systems

  • Waterproof and frost-resistant

  • Easy to apply - mix with water 

  • For interior and exterior use

Downloads & resources

Rapid Floor Tile Grout - Technical Data Sheet (440.89 KB)

This file is stored on an external website, please follow the link

How to use

Preparation

1. Make sure all grout joints are dry, clean, and dust-free. Let your tile adhesive fully dry before you start grouting. 

Application

2. Mix only what you can use in about 20 minutes (around 500g). Throw away any leftover once it starts to go off.

3. Add cold water to your bucket first, then slowly mix in the powder (3.5 parts powder to 1 part water) until you get a smooth, creamy paste with no lumps.

4. Let the mix rest for 2 minutes, then give it a quick stir. Don’t add more water after this point.

5. Standing on the centre of your tiles, apply the grout with a grout float or spreader, making sure each joint is fully filled. 

6. Press the grout firmly into the joints and wipe off any excess as you go using a warm, damp sponge.

7. Lightly wipe diagonally across the tiles with the sponge - gentle pressure helps keep the joints neat.

8. Leave the grout to dry for at least 3 hours, then polish the tiles with a clean, dry cloth.

9. If working outdoors, protect the area from bad weather or extreme temperatures until the grout is fully hardened.

How to remove

  • Wipe away any extra grout straight away using a damp cloth or sponge.
  • Clean your tools and equipment immediately with warm, soapy water to stop the grout from sticking.

Once hardened, grout is much tougher to remove:

  • Carefully scrape away dried residue from the tile surface using a plastic scraper or a grout haze remover designed for tiles. Work gently to avoid scratching the tiles, especially with glossy or delicate finishes.
  • For stubborn haze, use a damp microfibre cloth and a suitable grout-cleaning solution, following the product’s instructions.

Always test any cleaning product on a small, hidden area first - especially with natural stone tiles.  

FAQs

How long does Rapid Set Floor Tile Grout take to set?

EVO-STIK Rapid Set Floor Tile Grout sets in approximately 3 hours under normal conditions. Setting times may be significantly increased at lower temperatures. Avoid heavy foot traffic for at least 24 hours after grouting.

Is Rapid Set Floor Tile Grout suitable for ceramic, stone and porcelain tiles?

Yes. EVO-STIK Rapid Set Floor Tile Grout is suitable for use with all types of tiles, including ceramic, stone and porcelain tiles.

Find new, smarter ways of doing things

Find out what product you need, how to use it and where to buy it.

PRODUCT FINDER