Waterproof Wall Tile Adhesive

EVO-STIK Waterproof Wall Tile Adhesive is a ready-mixed, mould resistant, waterproof tile adhesive suitable for fixing ceramic wall tiles to most types of sound, interior surfaces.

Colours

Natural

Sizes
1 litre
2.5 litres
5 litres
10 litres

Product overview

EVO-STIK Waterproof Wall Tile Adhesive is a ready-mixed waterproof tile adhesive designed for fixing wall tiles in kitchens, bathrooms and other wet areas. It provides a strong, durable bond while helping to protect surfaces from water ingress and humidity.

Formulated with mould resistance and strong initial grab, it supports a cleaner, longer-lasting tiled finish. Suitable for a range of interior surfaces, this showerproof tile adhesive is ideal for bathroom walls, kitchen splashbacks and areas exposed to splashes and condensation.

With a 24-hour set time before grouting, this waterproof wall tile adhesive offers a reliable balance of working time and performance.

Suitable materials: Suitable for fixing onto most internal surfaces including plaster, plasterboard, glazed tiles, brick, cement, cement renders and tile backer boards.

Suitable tiles: Ceramic wall tiles.

Sizes: Available as a 1L, 2.5L, 5L or 10L waterproof wall tile adhesive.

Coverage: 1.1m² - 11m² dependent on unit size and substrate. 

Features & benefits

  • Our best tile adhesive for wet areas 

  • Ready-mixed waterproof wall tile adhesive

  • Excellent mould resistance and initial grab

  • Waterproof when set 

  • Grouts in 24 hours

  • Ideal for bathroom, shower and kitchen areas, subject to frequent and prolonged wetting 

  • Suitable for fixing ceramic tiles to plaster, plasterboard, glazed tiles, brick, cement render and tile back boards

  • Suitable for interior use

  • Supplied in a post-consumer recycled (PCR) tub 

Downloads & resources

Waterproof Wall Tile Adhesive - Technical Data Sheet (465.07 KB)

This file is stored on an external website, please follow the link

How to use

Preparation

1. Make sure surfaces are clean, dry, solid, flat, and free from dust, grease, paint, or loose materials. Fill any cracks or holes.

2. Check your substrate to ensure the plaster or plasterboard can support the tile weight.  

3. Prime or prepare difficult surfaces:  

  • Lightly abrade very smooth surfaces.  
  • Prime dusty or very porous areas with a Bostik primer.   

Application

4. Stir the product thoroughly before use. Spread adhesive onto the wall (around 3mm thick), working in small sections (about 1m² at a time) and comb through with a notched trowel.

5. Press tiles firmly into place with a slight twisting action. Check coverage occasionally by lifting a tile - the back should be fully covered.

6. Place a spacer at each corner (or side for staggered patterns) where tiles meet, ensuring they are positioned securely to prevent the tiles from shifting.

7. For wet areas (like showers), ensure a solid bed of adhesive is applied to avoid gaps behind tiles.

8. Remove spacers after 1–2 hours, once the adhesive has started to set.

How to remove

1. Wipe away any extra adhesive from tiles or surfaces while it is still wet.  

2. Clean tools immediately with warm, soapy water.  

Dried adhesive? If the adhesive has dried, you will need to remove it mechanically - so it’s much easier to clean up right away! 

FAQs

How long does Waterproof Wall Tile Adhesive take to set?

EVO-STIK Waterproof Wall Tile Adhesive typically sets within 24 hours, depending on the ambient conditions. When used to bond tiles to impervious surfaces, setting times may be longer.

Find new, smarter ways of doing things

Find out what product you need, how to use it and where to buy it.

PRODUCT FINDER