Sealants

Yes - as it’s both durable and mould-resistant, EVO-STIK All Purpose Silicone Sealant is ideal for use in bathrooms and kitchens. 

No – EVO-STIK All Purpose Silicone Sealant is not suitable for bedding in double-glazed units.

EVO-STIK All Purpose Silicone Sealant should form a skin within 30-40 minutes depending on bead width, temperature and humidity, and will be completely set within approximately 48 hours. 

The fungicide in the sealant can only work if it’s in contact with the mould - which can be prevented if the sealant is covered with soap or grease. A good technique for preventing the stains is to wipe the sealant with some dilute liquid bleach every few weeks.

Absolutely - EVO-STIK Clear for Life Shower & Bathroom Sealant is ideal for use around kitchen sinks, tiles and other fittings.

EVO-STIK Window and Door Frame Sealant will not be waterproof until it is fully dry, and can therefore be damaged by rainfall.

Yes, although you need to wait until EVO-STIK Window and Door Frame Sealant is fully dry before starting to paint it.

No – we recommend using a sealant for bonding the bottom of skirting boards instead of caulk. Caulk is best applied to the top of skirting boards. 

If you’re looking for a guide on how to stick skirting to a wall or sealing your skirting boards, discover our articles here: how to apply skirting boards and how to seal skirting boards.

Absolutely - EVO-STIK White for Life Shower & Bathroom Sealant is ideal for use around kitchen sinks, tiles and other fittings.

Yes, to prevent any film of material building up on which mould can grow.

Yes, to prevent any film of material building up on which mould can grow.

Yes, EVO-STIK Stops Mould Dead contains premium fungicides to keep your seals looking brand new – it won’t stain, blacken or yellow. It works to target mould at the source, preventing mould and mildew growth that withstands the test of time and is available in both white and clear.

There is no adequate solvent to remove EVO-STIK Bathroom and Kitchen Sealant. Carefully cut away excess with a very sharp knife. Do not use solvent to remove product from skin – use soap and water.

Excess EVO-STIK Flexible Decorators Filler sealant should be carefully scraped away using a knife and the remaining film wiped away immediately with a clean cloth damped with warm soapy water. Set sealant can only be removed mechanically using a sharp knife or scraper.

EVO-STIK 1 Hour Shower Bathroom Sealant will last up to 24 months when stored in original packaging in cool, dry conditions.

EVO-STIK Bathroom and Kitchen Sealant should form a skin within 15 to 60 minutes, dependent on bead width, temperature and humidity. For optimum performance, it may take up to one week to dry all the way through.

EVO-STIK Clear for Life Shower & Bathroom Sealant should form a skin within 30-40 minutes depending on bead width, temperature and humidity, and will be completely set within approximately 48 hours.

EVO-STIK White for Life Shower & Bathroom Sealant should form a skin within 30-40 minutes depending on bead width, temperature and humidity, and will be completely set within approximately 48 hours.

EVO-STIK Window and Door Frame Sealant should form a skin within 1-2 hours, and may take up to one week to dry all the way through.

As soon as EVO-STIK Flexible Decorators Filler is dry through. For thin layers less than 1mm, this could be as little as 30 minutes in good drying conditions. For thicker layers and less than ideal conditions, it could take a full day, or even longer if it’s very thick. Since this sealant shrinks as it dries, the surface stretches and this could crack a paint film if it was applied too soon.

Yes. EVO-STIK 1 Hour Shower Bathroom Sealant should form a skin within 20-30 minutes and after one hour it is suitable for water contact. It should be completely set within 24 hours.

Yes - EVO-STIK Bathroom and Kitchen Sealant forms a durable, flexible seal that will prevent both leaks and draughts.

Yes - EVO-STIK Window and Door Frame Sealant forms a durable, flexible seal that will prevent both leaks and draughts.

You should caulk before you paint. EVO-STIK Flexible Decorators Filler can be painted over, so it makes sense to caulk before you paint. Occasionally, people may prefer to prime the surface before a caulk application. However, caulk should always be the first step before topcoats of paint are applied. 

EVO-STIK's Stops Mould Dead, anti mould silicone, is suitable for non-porous surfaces like plastic baths and fittings and UPVC windows. Easily create a seamless seal around windows using our white or clear mould proof sealant to keep your window space looking clean and healthy for years to come.

• Caulk is for neat finishing indoors, like filling gaps around skirting boards or window frames before painting. It dries hard and can be painted over. 
• Sealant stays rubbery and flexible, making it perfect for kitchens and bathrooms where gaps need to stay watertight. It won’t usually take paint, but it stops leaks and handles movement well. 

Think of it this way: caulk for a paintable finish, sealant for a waterproof seal. 

EVO-STIK's Stops Mould Dead, anti mould silicone, is suitable for non-porous surfaces like plastic baths and fittings and UPVC windows. Easily create a seamless seal around windows using our white or clear mould proof sealant to keep your window space looking clean and healthy for years to come.

The fungicide in the sealant only works if it is touching the mould, and sometimes a film of soap can build up and block it. To prevent this, try cleaning the sealant with dilute bleach once a month or so.

When applied, EVO-STIK Clear for Life Shower & Bathroom Sealant has a ‘vinegar’-type odour, which is a standard feature of many sanitary sealants. This will disappear once fully cured.

When applied, EVO-STIK White for Life Shower & Bathroom Sealant has a ‘vinegar’-type odour, which is a standard feature of many sanitary sealants. This will disappear once fully cured.