Instant Grab Wall Tile Adhesive

EVO-STIK Instant Grab Wall Tile Adhesive for is a fast-acting, ready-mixed tile adhesive for fixing ceramic wall tiles on dry, internal walls. Its showerproof properties make it a suitable wall tile adhesive for areas subject to some splashing and condensation such as in kitchens and bathrooms.

Colours

Natural

Sizes
1 litre
2.5 litres
5 litres
10 litres

Product overview

EVO-STIK Instant Grab Wall Tile Adhesive is a ready-mixed, non-slip tile adhesive for fixing ceramic wall tiles quickly and securely. With high initial grab, it holds tiles firmly in place from the moment they’re applied, helping to prevent movement and reduce the need for readjustment.

Designed for fast, efficient tiling, this instant grab tile adhesive for walls is suitable for most interior surfaces. Its showerproof formula makes it ideal for areas exposed to light moisture, such as kitchen splashbacks and bathroom walls.

Easy to apply and reliable in performance, this ceramic wall tile adhesive is a practical choice when speed, control and a clean finish are key.

Suitable materials: Suitable for fixing onto most internal surfaces including plaster, plasterboard, glazed tiles, brick, cement, cement renders and tile backer boards.

Suitable tiles: Ceramic wall tiles.

Sizes: Available as a 1L, 2.5L, 5L or 10L instant grab tile adhesive.

Coverage: 1.1m² - 11m² dependent on unit size and substrate. 

Features & benefits

  • Instant grab tile adhesive for interior walls

  • Ready-to-use ceramic tile adhesive

  • High initial grab properties and no slip formula

  • Tile directly onto most substrates including existing tiles

  • Showerproof

  • Fixes up to 11m²

  • Suitable for interior use

  • Supplied in a post-consumer recycled (PCR) tub 

Downloads & resources

Instant Grab Wall Tile - Technical Data Sheet (260.76 KB)

This file is stored on an external website, please follow the link

How to use

Preparation

1. Make sure surfaces are clean, dry, solid, flat, and free from dust, grease, paint, or loose materials. Fill any cracks or holes.

2. Check your substrate to ensure the plaster or plasterboard can support the tile weight.  

3. Prime or prepare difficult surfaces:  

  • Lightly abrade very smooth surfaces.  
  • Prime dusty or very porous areas with a Bostik primer.  

Application

4. Stir the product thoroughly before use. Spread adhesive onto the wall (around 3mm thick), working in small sections (about 1m² at a time) and comb through with a notched trowel.

5. Press tiles firmly into place with a slight twisting action. Check coverage occasionally by lifting a tile - the back should be fully covered.

6. Place a spacer at each corner (or side for staggered patterns) where tiles meet, ensuring they are positioned securely to prevent the tiles from shifting.

7. For wet areas (like showers), ensure a solid bed of adhesive is applied to avoid gaps behind tiles.

8. Remove spacers after 1–2 hours, once the adhesive has started to set. 

How to remove

1. Wipe away any extra adhesive from tiles or surfaces while it is still wet.  

2. Clean tools immediately with warm, soapy water.  

Dried adhesive? If the adhesive has dried, you will need to remove it mechanically - so it’s much easier to clean up right away! 

FAQs

Why is Instant Grab Wall Tile Adhesive taking so long to set?

Ready-mixed tile adhesives set by the evaporation of the water they contain into the surface to which they are applied.

If EVO-STIK Instant Grab Wall Tile Adhesive is applied more thickly than recommended, or if the surface is impervious, heavily primed or damp, drying times may be considerably extended.

Increasing the temperature, improving ventilation and using a dehumidifier can help the adhesive dry more quickly.

Find new, smarter ways of doing things

Find out what product you need, how to use it and where to buy it.

PRODUCT FINDER