Filter by content type
Results
99 new results
Typical setting time of EVO-STIK Seriously Strong Stuff Fast Setting Adhesive is approximately 15 minutes. However, full bond strength will be achieved after 24 hours.
Before you apply EVO-STIK Seriously Strong Stuff Ultimate Adhesive, make sure that the surface is clean and preferably dry. Remove any loose or weak materials from the surface.
Yes, EVO-STIK Seriously Strong Stuff Ultimate Adhesive will bond damp surfaces and may even be used underwater. It is important to clean the surface to remove any loose matter …
Yes - EVO-STIK Seriously Strong Stuff Ultimate Adhesive will, but for best results do not use excess adhesive.
A skin will form after 5 to 15 minutes. EVO-STIK Strong Stuff Waterproof Adhesive will be fully cured after 17 to 24 hours depending on the ambient conditions.
After carefully scraping off the bulk, uncured EVO-STIK Strong Stuff Waterproof Adhesive may be removed using a cloth lightly moistened with white spirit. If it has cured then it will …
No, we do not recommend EVO-STIK Strong Stuff Waterproof Adhesive for this use.
Before applying EVO-STIK Strong Stuff Sealant & Adhesive, make sure that the surface is clean and preferably dry. Remove any loose or weak materials from the surface.
EVO-STIK Strong Stuff Sealant & Adhesive (up to 3mm thick) will take 17 to 24 hours to dry, depending on the ambient conditions.
Find new, smarter ways of doing things
Find out what product you need, how to use it and where to buy it.
Product finder