How long does Hard & Fast Metal Epoxy Putty take to cure?
EVO-STIK Hard & Fast Metal Epoxy Putty hardens to a metal-like finish in approximately 5 to 10 minutes and is fully cured after 30 to 60 minutes.
How can I clean excess Hard & Fast Metal Epoxy Putty?
Uncured EVO-STIK Hard & Fast Metal Epoxy Putty can be cleaned from tools using cellulose thinners or acetone. If the putty comes into contact with skin, remove it using a suitable proprietary…
Can Impact Adhesive be used to bond vinyl?
No. The plasticiser in vinyl can migrate into EVO-STIK Impact Adhesive over time, causing the adhesive to become soft and sticky. This can weaken the bond and eventually lead to bond failure.
Why has my Impact Adhesive turned to jelly?
EVO-STIK Impact Adhesive has probably been stored at temperatures below 5°C. Allow the adhesive to warm up gradually to room temperature overnight and it should return to its normal consistency and…
What materials can Contact Adhesive Spray be used on?
EVO-STIK Contact Adhesive Spray can be used on a wide range of materials, including wood, metal, ceramics, rigid plastics, glass, leather, cork, hardboard, underfelt, carpet tiles and foam-backed…
I have damaged the substrate below, what do I do before I install my new tiles/finishes?
Patch any holes or cracks with appropriate filler before reinstalling tiles. Ensure to allow it to dry until fully cured for maximum results.
I am experiencing excessive dust during the tile adhesive removal
Dampen the surface lightly using a bucket of warm water and a sponge, while scraping to reduce dust.
The substrate I'm left with is uneven!
Sand or level out imperfections using a grinder, after adhesive removal to get a smooth, clean surface.
Can I tile over old adhesive?
It’s not recommended. Old adhesive can compromise the bond and cause uneven tiling.
Can I use General Purpose PVA for engineered wood flooring?
While EVO-STIK General Purpose PVA can bond wood and is suitable for a range of interior DIY and building applications, it is not specifically designed for installing engineered wood flooring…