Search

If you can not find the information you need on our website, please get in touch

Results

136 new results
default image

How long does Seriously Strong Stuff Fast Setting Adhesive take to dry?

Typical setting time of EVO-STIK Seriously Strong Stuff Fast Setting Adhesive is approximately 15 minutes. However, full bond strength will be achieved after 24 hours.
default image

How should I prepare surfaces before applying Seriously Strong Stuff Ultimate Adhesive?

Before you apply EVO-STIK Seriously Strong Stuff Ultimate Adhesive, make sure that the surface is clean and preferably dry. Remove any loose or weak materials from the surface.
default image

Can Seriously Strong Stuff Ultimate Adhesive bond wet surfaces?

Yes, EVO-STIK Seriously Strong Stuff Ultimate Adhesive will bond damp surfaces and may even be used underwater. It is important to clean the surface to remove any loose matter&nbsp…
default image

Can Seriously Strong Stuff Ultimate Adhesive bond two non-porous surfaces?

Yes - EVO-STIK Seriously Strong Stuff Ultimate Adhesive will, but for best results do not use excess adhesive.
default image

How long does Strong Stuff Waterproof Adhesive take to dry?

A skin will form after 5 to 15 minutes. EVO-STIK Strong Stuff Waterproof Adhesive will be fully cured after 17 to 24 hours depending on the ambient conditions.
default image

How do I remove excess Strong Stuff Waterproof Adhesive?

After carefully scraping off the bulk, uncured EVO-STIK Strong Stuff Waterproof Adhesive may be removed using a cloth lightly moistened with white spirit. If it has cured then it will&nbsp…
default image

Is Strong Stuff Waterproof Adhesive suitable for fish tanks and long-term water immersion?

No, we do not recommend EVO-STIK Strong Stuff Waterproof Adhesive for this use.
default image

How should I prepare surfaces before applying Strong Stuff Sealant & Adhesive?

Before applying EVO-STIK Strong Stuff Sealant & Adhesive, make sure that the surface is clean and preferably dry. Remove any loose or weak materials from the surface.
default image

How long does Strong Stuff Sealant & Adhesive take to dry?

EVO-STIK Strong Stuff Sealant & Adhesive (up to 3mm thick) will take 17 to 24 hours to dry, depending on the ambient conditions.

Find new, smarter ways of doing things

Find out what product you need, how to use it and where to buy it.

Product finder